T-Wash Solution Pre-treatment Etch Galvanised Steel & Zinc Treated Surfaces

Out of stock

T Wash Solution Pre-treatment Etch Galvanised Steel & Zinc Treated Surfaces

  • A pre-treatment to etch galvanised steel and zinc treated surfaces.
  • Promotes good adhesion for subsequent coatings.
  • Will turn the surface black.

Application: Brush, Dip, Roller

Coverage: 40 Square Metres Per Litre

Suitable For: Galvanised Metal

Drying Times: Touch Dry: 1.5 – 2 hours

This product is currently out of stock and unavailable.

SKU: VC-15343-5

Description

T Wash Solution Pre-treatment Etch Galvanised Steel & Zinc Treated Surfaces

  • A pre-treatment to etch galvanised steel and zinc treated surfaces.
  • Promotes good adhesion for subsequent coatings.
  • Will turn the surface black.

Application: Brush, Dip, Roller

Coverage: 40 Square Metres Per Litre

Suitable For: Galvanised Metal

Drying Times: Touch Dry: 1.5 – 2 hours

Apply to new galvanising within 7 days. Zinc surfaces which are contaminated should be cleaned down using an abrasive pad, water and cleaning agent followed by rinsing and allowing to dry. If contaminated with oil or grease surfaces should be wiped over with Universal Degreaser before carrying out the cleaning down procedure. Can be applied to weathered galvanised surfaces although reactivity of the treatment will diminish as the age of the galvanising increases and can result in an uneven colouration from light grey to dark grey.

If no colour change takes place, these areas should be considered contaminated. Successive coats should not be applied to overcome the lack in change of colour of the zinc surface.

 

FREE DELIVERY ON ALL UK PURCHASES

Additional information

Size (L)

5L, 5LX4

Product Use

T-Wash

Reviews

There are no reviews yet.

Be the first to review “T-Wash Solution Pre-treatment Etch Galvanised Steel & Zinc Treated Surfaces”

Your email address will not be published. Required fields are marked *

Related products